|
1. Compatibility
Autoplugin RCP is compatible to Volvo models, factory equipped with Ardic 912 (Eberspächer)
fuel-fired heater:
|
Volvo XC90 |
2005—2014 |
|
|
|
|
Volvo XC70 |
2005—2007 |
|
|
|
|
Volvo V70 |
2005—2007 |
|
|
|
|
Volvo S80 |
2005—2007 |
|
|
|
|
Volvo S60 |
2005—2010 |
|
|
|
|
|
|
|
RCP module needs that 2 timers and direct start / stop
function for the heater control are present in the menu of cental instrument panel. Therefore it may be necessary to load software by Volvo dealer equipment
before make a connection. |
|
|
|
|
|
|
|
2. Remote Start, Stop and Timer Start Cancel of FFH
Autoplugin RCP lets you to start and stop of fuel-fired heater by remote control. And certainly, you can use driver
information system to program FFH, as you did it before. Moreover, you can remotely cancel the program start of FFH,
if you trip was cancelled.
3. Variety of Remote Controls
Autoplugin RCP has set of inputs for easy connection of diverse remotes, like Webasto Telestart (included
to Autoplugin WTS Kit),
Eberspächer Easy Start, Defa Smart Start
(included to Autoplugin DSS Kit), GSM-modules (to control heater from
mobile),
alarm systems controls, etc.
4. Plug and Play or Permanent Installation
Autoplugin RCP may be connected:
|
|
|
|
Into the OBD-II diagnostic connector placed on the dashboard by using a
special cable.
The module is fixed on the back side of the dashboard with adhesive tape.
PnP-connector and wires
are hidden under the cover of the OBD connector. |
|
|
|
Hidden easy permanent connection to the OBD-II wires by using
quick splice connectors |
|
|
|
Hidden permanent connection to the car's wiring |
|
|
 5. Embedded Start / Stop of FFH by Volvo
Remote Key
Autoplugin RCP lets you immediately start the fuel-fired heater by using
original
Volvo 5-button remote key. It uses a combination of button presses to activate
this function.
A remote is always with you now.
6. Additional Button and LED Functions
An additional button
may be installed on console for one-touch FFH start / stop and easy settings change.
Button functions:
LED is used to indicate run-time errors of FFH and to confirm the button presses.
7. FFH Start and Stop Indication by Lights
Autoplugin RCP lets you use the car marker and mirrors lights to indicate the start and stop
FFH. Lighting off delay is adjusted.
 |
8. Main Battery Protection from Discharging
Fuel-fired heater uses the energy of the vehicle's main battery to work, not only fuel.
Autoplugin RCP may control a level of battery voltage to prevent the battery from discharging.
The level can be
adjusted in accordance of battery condition. Also you can limit time
of autonomous work of FFH.
|
9. Control of External Devices
Autoplugin RCP allows you to
control external devices while the heater operates. Functions and examples of using:
|
Disconnection of consumers during heater operation time to preserve battery power
(for example, turning off the climate control fan) |
|
|
|
Disabling highly sensitive sensors of alarm to prevent false alarms during
heater operation |
|
|
|
|
|
